Series 400-G1/4"

Series 400

These are 2 stage valves actuated electro-pneumatically. A serie 300 directly operated solenoid valve actuates pneumatically the principal power distributor.

This integrated system allows configurations of systems requiring very little space.

The pilot air is normally taken from the inlet port (autofeed) and the only actuating signal is electric.

The range of the solenoid valves, as far as dimensions and mechanical construction, is similar to series 200.

We have therefore solenoid valves G 1/8", G 1/4",G 1/2" and G 1" with identical pneumatic characteristics that are, however, actuated electrically.

They have a balanced spool, insentive to presence or absence of pressure. they are constructed in 3 and 5 way with 1 solenoid (monostable) or 2 solenoids (bistable) and also 5 ways 3 positions with closed centres, open centres and pressured centres.

If should be noted that the autofeed of the electric pilot requires always inlet through port 1 and if a 3 ways normally open configuration is desired, it is necessary to switch the operators.

Please note that while the microsolenoid can be mounted in any direction, standard solenoid requires mounting as inticated in the photographs and

diagrams.

The order codes pertain only to the solenoid valve with mechanical actuator "M2" or solenoid "S*" already assembled.

M2 coils are not included and have to be ordered separately (see Series 300).

Coils for M2 and solenoids "S" homologated are available (see Series 300).

The solenoid valves G1/8" (488), are supplied complete with coil (see series 300) so that the tension has to be added to the solenoid valve code:

M9 = coil 24 V D.C. (rating power 2 Watt)

M11 = coil 24 V D.C. (rating power 3.8 watt)

M56 = coil 24 V 50/60 Hz (rating power 9 VA)

M57 = coil 110 V 50/60 Hz (rating power 9 VA)

M58 = coil 230 V 50/60 Hz (rating power 9 VA)

Ordering codes:

464.32.0.1.M2

464.52.0.1.M2

464.32.0.12.M2

464.52.0.12.M2

464.32.0.0.M2

464.52.0.0.M2

464.53.31.0.0.M2

464.53.32.0.0.M2

464.53.33.0.0.M2

464/1.32.0.1.M2

464/1.52.0.1.M2

464/1.32.0.12.M2

464/1.52.0.12.M2

464/1.32.0.0.M2

464/1.52.0.0.M2

464/1.53.31.0.0.M2

464/1.53.32.0.0.M2

464/1.53.33.0.0.M2